Australia, Perth RepRap User Group :
Reprap Forums
(This forum is the hub for Australian RepRapping discussion in general, until we have enough activity to give Australia its own forum.)
Parts Buy in
Posted by:
Oscar Fox
()
Date: November 02, 2009 05:40PM
Hi everyone,
The Australian RepRap groups seem to be losing a bit of momentum lately, I think this may be due to the lack of parts here in Oz.
I have looked at sourcing all the metal parts from the U.S and am inquiring to see how many people would be interested in a kit.
The kit contains:
1 brass nozzle with a 0.4mm orifice
1 brass heater barrel
1 PTFE thermal break
1 steel drive screw
2 brass half-bearings for the drive screw
2 nuts for the steel drive screw
I am currently waiting for the pricing to bring in a bulk lot and will let anyone interested know
Please reply if your interested.
The Australian RepRap groups seem to be losing a bit of momentum lately, I think this may be due to the lack of parts here in Oz.
I have looked at sourcing all the metal parts from the U.S and am inquiring to see how many people would be interested in a kit.
The kit contains:
1 brass nozzle with a 0.4mm orifice
1 brass heater barrel
1 PTFE thermal break
1 steel drive screw
2 brass half-bearings for the drive screw
2 nuts for the steel drive screw
I am currently waiting for the pricing to bring in a bulk lot and will let anyone interested know
Please reply if your interested.
Re: Parts Buy in
Posted by:
Oscar Fox
()
Date: November 03, 2009 09:20PM
Just a quick update,
The parts will be for version 2 and comes with a PTFE insulator and a Brass combination heater barrel and nozzle (0.5mm orifice)
This a much simplified design (see here [reprap.org] )
This design does not require the drive screw, bearings etc.
Pricing will be around $20.00 AU per kit. I will be bringing in a batch of ten but I will want about 5 confirmed orders before I do so. if you want a kit please PM me.
The parts will be for version 2 and comes with a PTFE insulator and a Brass combination heater barrel and nozzle (0.5mm orifice)
This a much simplified design (see here [reprap.org] )
This design does not require the drive screw, bearings etc.
Pricing will be around $20.00 AU per kit. I will be bringing in a batch of ten but I will want about 5 confirmed orders before I do so. if you want a kit please PM me.